INSTALLATION IS EASY
The Standard Spa and Turbo systems consist of only two components, an electrical control box that plugs into a standard 240V outlet and a clear PVC chamber that is installed in the return line to your pool or spa from the filter or pump. System installation can easily be achieved in under an hour.
The only work involved is cutting a small section of the PVC pipe out of the line that runs back to your pool or spa and gluing two fitting on the ends of the pipe that was cut. The chamber is then screwed hand tight onto the fittings.
The ionisation/oxidation chamber in spas is installed in the water line used by the recycling pump. ECOsmarte technicians can provide guidance for installation on hundreds of different spa models and manufacturers and are available six days a week to provide toll-free support.
Australian Support 0414 751 259
INSTALLATION IS EASY
The Standard Spa and Turbo systems consist of only two components, an electrical control box that plugs into a standard 240V outlet and a clear PVC chamber that is installed in the return line to your pool or spa from the filter or pump. System installation can easily be achieved in under an hour.
The only work involved is cutting a small section of the PVC pipe out of the line that runs back to your pool or spa and gluing two fitting on the ends of the pipe that was cut. The chamber is then screwed hand tight onto the fittings.
The ionisation/oxidation chamber in spas is installed in the water line used by the recycling pump. ECOsmarte technicians can provide guidance for installation on hundreds of different spa models and manufacturers and are available six days a week to provide support – 0414 751 259
